Hunan Jiushun Hongye Electronic Technology Co., Ltd.

x
page title

Display RFQ Template: What to Send Suppliers for a Quote

An RFQ that reads like a shopping email gets a shopping-email answer. If your inquiry says only "please send me your best price for phone screens", the supplier has to guess the model, the volume, the quality bar and the destination — and every guess either delays the quotation or produces one you cannot use. At STMAX we answer a surprising number of inquiries every week, and the ones that turn into orders are almost never the longest — they are the ones with the right six or seven facts in them.

This guide gives you a field-by-field RFQ template for sourcing replacement phone screens and industrial display modules, two worked examples you can copy, and the habits that slow a quotation down. It is written from the supplier side of the desk, so it also explains what we check before replying.

Why So Many Display RFQs Get Slow or Useless Answers

A quotation is not a price lookup — it is a small production plan. Before a supplier can quote you, somebody has to confirm that the panel exists in the configuration you asked for, that the touch option matches, that the volume fits the production schedule, and that the packing and compliance requirements are covered. Every field you leave blank becomes a question they have to send back, and each round of questions can add days to the reply.

From our side, the pattern is consistent: inquiries that arrive with a model code, a quantity and a destination usually get a structured answer in the first round, while inquiries that arrive as a single line usually take three or four rounds before anything quotable is on the table. The RFQ template below is designed to close that gap in one message.

The Nine Fields Every Display RFQ Should Contain

Whether you buy phone replacement screens or industrial TFT modules, the same nine fields decide how fast and how accurately a supplier can answer. Fill in the ones that apply; for fields that genuinely do not apply to your case, write "N/A — advise" so the supplier knows you did not overlook it.

#FieldWhat to WriteWhy the Supplier Needs It
1Application and end deviceWhat the display goes into: a repair chain fixing consumer phones, a device brand, an industrial HMI, medical equipment, etc.Sets the quality bar, the compliance scope and the failure consequences.
2Model code or part number (phone screens)The exact model or its code, e.g. Reno3 (CPH1943/1947), Reno3 Pro 5G (CPH1985). Regional variants matter.Screen assemblies are model-specific; a series name alone is not enough to identify a part.
3Size, resolution, interface (industrial modules)Diagonal, resolution, brightness class if known, and interface (RS-232, LVDS, MIPI, HDMI, USB).These define the module electrically and mechanically; guessing here produces quotes for the wrong product.
4Screen type and assembly scopeLCD or OLED; screen only, screen with frame, or full assembly with touch digitizer.These are different SKUs with different prices. If you are unsure, say so and ask the supplier to confirm.
5Quantity and reorder patternUnits per first order and per repeat order, monthly or quarterly if predictable.Volume drives pricing, production scheduling and stocking advice.
6Quality expectations and inspection methodHow you will inspect on arrival: power-on test of every unit, spot checks per carton, etc.Lets the supplier align factory testing and packing with your incoming inspection instead of against it.
7Packing and labelingBox type, per-box quantity, labels, barcodes, any destination-market language needs.Avoids repacking costs and customs surprises later.
8Delivery expectations and destinationTarget shipment window and destination country or port (not a penalty date).Production and shipping options depend on destination and season.
9AttachmentsPhotos of the part you need, the old removed part, or a drawing with dimensions for custom work.One clear photo of the flex cable and connector often answers more questions than a paragraph of text.

Worked Example 1: An RFQ for a Phone Repair Chain

Suppose you run a repair business that replaces OPPO Reno3-family screens every month. A complete RFQ fits in eight lines:

  • Application: phone repair chain, walk-in customers, screens installed same day.
  • Models: Reno3 (CPH1943/1947), Reno3 Pro 5G (CPH1985), Reno3 Pro 4G — one line per model, quantities separate.
  • Scope: full assembly with touch digitizer, with frame where available.
  • Quantity: e.g. 300 pcs first order, 200–400 pcs monthly after.
  • Inspection: every unit powered on and touch-tested before installation.
  • Packing: individual boxes, 20 pcs per carton, model label on each box.
  • Destination: [your country], shipment within [your window].

Notice what this does: the supplier can quote each model as its own line item, confirm which variants share parts, and align packing with your repair bench workflow. For reference, our Reno3 Pro 4G LCD touch screen digitizer assembly and Reno3 / Reno3 Pro 5G screen assembly pages list the model codes each SKU covers — if your RFQ already carries those codes, no clarification round is needed.

Worked Example 2: An RFQ for an Industrial Display Module

Industrial RFQs fail for the opposite reason: buyers send electrical specs but forget the application context. A complete industrial RFQ looks like this:

  • Application: control panel for food-processing equipment, washdown-adjacent environment.
  • Module: 5.0-inch TFT, 480×854, IPS, RS-232 interface — our F19 industrial module is one reference point in this class.
  • Environment: operating temperature range the end product must survive, e.g. −20°C to +70°C.
  • Touch: with or without touch panel; if yes, glove operation needed or not.
  • Quantity: pilot 50 pcs, production 500 pcs per quarter.
  • Integration: mounting method, connector position, any bezel or cover lens requirement.

The environment line is the one buyers most often omit, and it is the one that changes the answer most: brightness, bonding and temperature class all depend on it. If you are still comparing module options, our guide on how to choose an industrial TFT LCD module walks through the selection logic behind each of these fields.

How Suppliers Actually Read Your Inquiry

It helps to know what happens on the other side. When an RFQ reaches our sales team, we route it through roughly the same checklist regardless of who is asking:

  • Identifiability. Can we map the request to a specific panel or assembly without asking a question? Model codes and clear photos do most of this work.
  • Feasibility. Does the configuration exist, and does the environment or market requirement need a different build than the standard one?
  • Scale. Does the volume fit standard production planning, or does it need a slot reserved? This is why quantity matters even for a first probe order.
  • Compliance. What certifications and documents does the destination market require? Our production is ISO 9001 and ISO 14001 certified, panels are RoHS and REACH compliant, and every unit is tested one by one before packing — but which documents you need is a question only your RFQ can answer.

The practical takeaway: a supplier that asks you zero questions is either very well informed or not looking closely. Expect one or two clarification rounds on any first-order RFQ — the template simply keeps them short.

Have a Model List Ready?

Turn it into an RFQ in five minutes: one line per model with quantity and destination, plus how you inspect on arrival. We will confirm coverage model by model and flag anything we cannot supply before you build an order around it.

Send Your Inquiry →

Five Habits That Slow a Quotation Down

  • Asking for the "best price" with no quantity. Without volume there is no price, only a range. Even an estimate like "a few hundred per month" moves the reply from a guess to a quote.
  • Mixing models inside one paragraph. List each model on its own line with its own quantity. Mixed paragraphs are the number one cause of crossed line items in quotations.
  • Sending a photo without any text. A photo of a flex cable tells us the connector, not the model. Text identifies; photo confirms.
  • Omitting the regional variant. Two screens with the same marketing name can differ by region or carrier build. Model codes remove the ambiguity.
  • Not stating how you will inspect. If we know your incoming test, we pack and test to match it. If we do not, we assume a standard, and mismatches surface as complaints later. Our incoming quality checklist shows the kind of inspection plan buyers usually describe.

What a Complete Quotation Should Contain — and What to Confirm in Writing

Once your RFQ is complete, hold the reply to the same standard. A quotation you can act on should state, per line item:

ItemWhat It Should Tell You
Price basisUnit price at your stated volume, the currency, and how long the price holds.
Shipping termThe incoterm and the port it applies to, so two quotes are actually comparable.
Lead timeProduction and transit time after order confirmation — ask what could move it.
Packing specificationBox, carton quantity, labeling — matching what you asked in field 7.
Sample termsWhether samples are available for your models and on what basis. Ask us directly; terms vary by model.
Warranty and after-salesWhat is covered, for how long, and what evidence is needed for a claim. Confirm the exact wording in writing before ordering.
Payment termsFor a first order, expect standard terms; ask what documentation a credit arrangement would need.

Two of these — sample terms and warranty wording — are the ones buyers most often leave verbal. Put both into the order confirmation email. If a supplier resists writing them down, that tells you something before any money moves.

Frequently Asked Questions

1. How detailed does a first RFQ need to be?

Detailed enough to identify the part and the scale: model code or full spec, quantity, destination. Fields 6–9 can be marked "to discuss" — but say so explicitly rather than leaving them silent.

2. Should I send one RFQ per model or combine several models?

Combine them in one message, but keep one line per model with its own quantity. One message is easier to track; separate lines prevent crossed quotations.

3. Do I really need the exact model code?

For phone screens, yes wherever possible — codes like CPH1943 or CPH1985 identify the part unambiguously. For industrial modules, size + resolution + interface + temperature range does the same job.

4. What if I do not know whether my part is LCD or OLED?

Say so in the RFQ and send a photo of the original screen powered on. Our overview of LCD vs OLED replacement screens explains what to look for, and the supplier can confirm from the photo.

5. Can I ask for samples before committing to an order?

Yes — include it as a field in your RFQ. Availability and terms depend on the model and volume, so ask the supplier to state sample terms in the quotation rather than assuming.

Ready to Test the Template?

Send us your RFQ using the nine fields above — model codes, quantities, destination and how you inspect. You will get a line-item answer, and anything we cannot cover, we will tell you before you build an order around it.

Request a Quotation →

More background for your sourcing file: how to evaluate a replacement screen supplier, the difference between OEM and aftermarket screens, and our company profile with production and testing details. For automotive and harsh-environment projects, see our note on quality and reliability standards for display modules.